|
| Z-20-LP Hydraulic Timber Compression Strapping Machine |
|
|
|
Signode's Z-20-HD- LP press is designed to run on both Tenax polyester strap and also on Apex steel strapping if required. The units can be equipped with many options to suit the exact needs of the customers plants and the lumber products to be packaged.
The machine is equipped with the all-electrical strapping head, Z-20 for Tenax polyester strapping. Z-20 is an innovative modular strapping system consisting of separate sealing and tensioning modules. The strapping unit is top mounted on the upper compression bar and is free floating for strap tension transmission. The unit can compress and strap loads with a min. height of only 250 mm. Standard min machine conveyor height 470 mm. |
|
|
|
 |
|
|
|
|
|
|
|
|
Z-20-HD-LP Options |
|
|
|
|
|
AK-100 Strapping head for Apex steel strapping or AK-200 Strapping head for Tenax polyester strapping |
|
|
|
Automatic top/bottom edge protection applicator units |
|
|
|
Automatic bottom batten feeder magazine, with 9 magazine compartments |
|
|
|
Jumbo (73 kg) Strapping dispenser unit for Tenax polyester strapping in jumbo coils |
|
|
|
|
|
Automatic Top Batten Applicator (free-standing) |
|
|
|
|
|
Top sheet applicator unit (free-standing) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Z-20-HD-LP Press Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
Pack Width |
|
min. 500 - max. 1300mm |
|
|
|
|
|
Pack Height |
|
min. 250 - max. 1300mm |
|
|
|
|
|
Compression Level |
|
max. 7.5 tons |
|
|
|
|
|
|
|
|
|
Compression |
|
Hydraulic |
|
|
|
|
|
|
|
|
|
Controller |
|
Siemens S7-300 PLC |
|
|
|
|
|
|
|
|
|
Power Consumption |
|
11 kVA |
|
|
|
|
|
Electrical Connection |
|
400 Volt, 3-Ph,50 Hz+N |
|
|
|
|
|
Control Voltage |
|
24 V DC |
|
|
|
|
|
Pneumatic Connection |
|
6 Bar |
|
|
|
|
|
Air Consumption |
|
120 L / Cycle |
|
|
|
|
|
Machine Weight |
|
3.500kg with options |
|
|
|
|
|
