Print E-Mail
 
Industry Specific Solutions >> Graphic Arts >> Strapping Equipment >> MHC-GCM
MHC-GCM
The Standard not customized machine is equipped with the following components:
  • 4 legs and press Platen driven by belts
  • 1 MHC Head including Feeder and sealer Units (second head optional)
  • Feeder fitted on the dispenser and sealer fitted on the press platen
  • 1 Strap dispenser type "modular dispenser" (no quick exchange coil)
  • 2 chutes with outrigger flaps
  • 2 Bayonets with aluminum flaps (fixed pitch 750 mm)
  • 2 Siemens S7-200 PLC with 1 TD200 panel mounted in Operator Panel
  • Electrical Cabinet/Operator Panel with 5 m cable length free
  • Cycle Counter fitted on the sealer module
Basic Specifications
  • Pallet Height (including wood pallet) : mini 300 mm - maxi 1800 mm Option: other possible dimensions on request
  • Pallet Width: 600 mm minimum - 1500 mm maximum
  • Pallet length:
    * For parallel straps no limit
    * For cross strap according to a turntable diagonal of 1820 mm maximum
  • Conveyor Height: 80 mm minimum - 500 mm maximum
Strap Sizes (Dispenser and Head dependent):
  • Width 9 - 11 mm
  • Gauge 0.5 - 0.7 mm
  • PP or PET flat
  • 405 mm core
Download Literature (605KB)
   
Machine technical data
Strapping System MHC cam driven strapping
Sealing Method Friction-Weld with single-Phase motor
Weld Alignment Tolerance Better than 1 mm
Feed and Take Up AC Motor controlled (3 m/s)
Strap Tension 150 N to 900 N
Tension System Frequency drive Telemecanique ATV 11
Compression System 2 Inverters driven DC Brushless-Motors, Zero to 32000N (adjustable compression by step 2500 N)
Chute system Telescopic chute
Bayonet system AC Motor driven 42 mm high aluminium profil with aluminium gates
Capacity for parallel strap Up to 120 pallets/hour according to the pallet dimensions, number of straps, compression rate, strap tension
Capacity for cross strap Up to 40 pallets/hour according to the pallet dimensions, number of straps, compression rate, strap tension
Power Requirements 400V - 3 Phases- 50Hz (no Neutral needed)
Power Consumption 7 kW (40 A-SB fuses for power supply)
Control Voltage 24 VDC
Air Supply 6 bars – ½ “
Air consumption 60 l/h
Operating Temperature 5°C – 40°C
Max Noise Level 79 dBA
Machine Weight 2500 kg
Control System PLC Type Siemens S7-200 with TD200 panel
Machine Colour Machine Base: RAL6000, E.Cabinet: RAL 7032 (RAL 9006 for the dispenser), Moving parts: RAL1003
Layout Drawing no. MHC-GCM (3D solidwork *PDF Format)
 
Back To Top